Wow! That's a lengthy name for this little toy, but I couldn't figure out what else to call it. This fold-up race track is perfect for traveling, waiting rooms, and church services. The outside has three pockets to carry toy cars in (Matchbox or Hot Wheel size) and when opened, it's just the right size to sit on a toddler or preschooler's lap. Here are the instructions, so you can make one, too. (This tutorial is for personal and gifting use, please don't sell your finished products)
What you will need:2 pieces of coordinating fabric: each 12 1/4" x 10 1/4" (One for the outside, one for the inside)
2 pieces of same outer fabric: each 8" x 4" (For car pockets)
2 pieces of another coordinating fabric: each 10" x 2 1/2" (For handles)
Small piece of black fabric for racetrack
Medium weight fusible interfacing: about 1/3 yard
Heat and Bond: Small amount: just enough to attach race track and details
A thin plastic three ring binder (or any thin plastic, you'll need two pieces, each 5.5"x4.5") Here's a picture of the one I cut up:
And thin, yellow grosgrain ribbon
The Steps:
Iron interfacing onto outer pieces of fabric: one 12 1/4" x 10 1/4" piece, one 8 1/4" x 4 1/4" pieces, and the 10"x2 1/2" handle pieces. Sew the 8 1/4" x 4 1/4" rectangles together with right sides facing. Leave a small opening to turn right side out. Press seams, remembering to fold in raw edges. Add this small rectangle to the large outer fabric rectangle, 1 1/2" from the top, bottom, and one side, using a top stitch on three sides. You should have one big pocket. Now, top stitch two lines 2 1/2" from edges and from each other to create 3 pockets. Next, you're going to create the handles. Take one handle piece (10"x2 1/2"), fold in half with right sides together and sew along the raw edge. Turn right side out and press. Repeat with other handle piece. Pin one handle to the large rectangle, 3" from the top and bottom. You can use a basting stitch to attach it, but I just sew right through the pins.To make the race track: 
Cut either an "S" shape or a figure-8 from the black fabric for the race track. Apply Heat and Bond to back of race track and iron onto the right side of the 12 1/4" x 10 1/4" rectangle that will be on the inside when it's folded. This is the time to apply any details you might want, I cut little strips out of the scraps from the outer fabric and added them to the ends of the track to create start and finish lines. Top stitch along all edges of race track with a blanket stitch. Next, apply Heat & Bond to back of thin yellow grosgrain ribbon. Cut the ribbon into 1" pieces. Iron the ribbon pieces along center of track. Top stitch one line through all yellow ribbon dashes from one end of the race track to the other end.
Cut either an "S" shape or a figure-8 from the black fabric for the race track. Apply Heat and Bond to back of race track and iron onto the right side of the 12 1/4" x 10 1/4" rectangle that will be on the inside when it's folded. This is the time to apply any details you might want, I cut little strips out of the scraps from the outer fabric and added them to the ends of the track to create start and finish lines. Top stitch along all edges of race track with a blanket stitch. Next, apply Heat & Bond to back of thin yellow grosgrain ribbon. Cut the ribbon into 1" pieces. Iron the ribbon pieces along center of track. Top stitch one line through all yellow ribbon dashes from one end of the race track to the other end. Putting it all together:
Sew both long sides and one short side (the side that the handle piece is pinned to) of the two large rectangles (12 1/4" x 10 1/4) together, right sides facing. Turn right side out and press. Cut one side of 3 ring binder into two pieces, each 5 1/2" x 4 1/2". Put one plastic piece in the sewn rectangle, pushing it all the way to the sewn side. Top stitch a line right down the center of the rectangle, using the edge of the plastic piece as a guide. This keeps the two plastic pieces from sliding around. Insert the other plastic piece. Press the open end of rectangle, so that the raw edges are turned in. Pin other handle inside this end, 3" from the top and bottom. Top stitch this side closed, being sure to catch raw edges and the ends of the handle. 
That's it! Your ready for a road trip with your little one and their new "Take along race track and toy car holder". :) If you can think of a catchier name for it, please leave a comment and be sure to leave a comment with a link to pictures of your finished projects! I love to see other people's creations and variations. I'm linking to the Brassy Apple Crafty Summer Series, head over there to check out other great ideas for the car.
Thanks to 
Next, you'll cut the pattern apart along the straight line across the owl's body. Use this to cut one top piece from the outer fabric and one bottom piece from the coordinating outer fabric. 
Next, cut the wings, eyes, and beak from the pattern paper. Use these to cut out the details from coordinating scraps. 
For the gusset (sides of the bag): Cut a 3 1/2" wide piece of fabric the length of the outer edge of the owl, starting from one top corner down around the bottom and back up to the top. I'm not sure how to better explain this step, but I took a piece of ribbon and laid it out around the large owl shape to get the length. You'll need one of these gusset pieces from the outer fabric and one from the lining fabric. 
Stitch around the edge. I used a simple straight stitch so that the edges will fray a bit and give a fun look. 
Sew top and bottom pieces together along straight edge (right sides together).
Press seam open. 
Add the eyes and beak in the same manner as the wings. 
Sew the outer gusset piece to the front owl piece, right sides together. Once that is sewn, sew the gusset to the back outer piece in the same manner (right sides together). This step is much easier if you pin your fabric well. 
Turn the bag right-side-out: You're bag is taking shape! 
Next, sew the lining pieces to the gusset the same way you sewed the outside together, except REMEMBER TO LEAVE A HOLE at the bottom, to turn the bag right-side-out once the lining is sewn into the outer piece. 
Attach magnetic snaps to the center of the lining, 1 1/2" from top of lining. This is very easy, just follow the directions on the package. 
Pull bag out through the hole in the bottom of the lining. 
Top stitch the hole in the lining closed, remembering to tuck in the raw edges. It helps to press it before sewing. 
Top stitch around bag opening. (This is where I forgot to keep taking pictures, sorry!)
I just realized this picture is sideways...sorry. 
An over-sized shoulder bag. Here's 
A zippered pencil bag. The owl applique for this came off some very ugly pink/white polka dot fleece from 
Pencil topper, thanks to 
Owl 
Posts
